Wire trace
Submitted by jfawkes on Thu, 2013-01-17 12:43
Will I need to use this for targeting sharks stingrays and taylor?
And if so how do I attach it to a rig?
Also what are the best rigs to use for small sharks and stingrays?
_0.thumbnail.JPG "ogrady white")
Gaffatron
Posts: 355
Date Joined: 07/07/11
http://fishwrecked.com/forum/
http://fishwrecked.com/forum/landbased-sharking-rigs
have a squiz throigh the search function on the left hand side tons of info in there!
i never use wire for rays or tailor just mono leader, but wire with sharks is bit of a must!
Luke_h_93
Posts: 14
Date Joined: 28/12/12
I generally use 100lb wire
I generally use 100lb wire trace when fishing for shark,
Usually i use a balloon with about 1.5m of wire trace down to a size 8/0 hook through a yakka or mackrel.
Have caught a few gummy sharks with my brother before on that method.
Good luck !
catchalittle
Posts: 1875
Date Joined: 04/09/08
easy way of making your rig
easy way of making your rig up is to use crimps or go and buy a black magic pre made shark trace
Nathan
jfawkes
Posts: 38
Date Joined: 01/01/13
I got the stuff that welds
I got the stuff that welds together with a match works quite good actually.
I think its called halco lockweld.