Beware of the blue Jackman for sale on boats online!
Submitted by beeroclock on Wed, 2020-07-15 10:35
Just a quick heads up if your in the market for an ali boat. I wanted this boat as soon as i saw it, ticked all the boxes for me, had it checked over - lets just say it has some serious "structural issues" (trailer requires electric brakes also but i didnt care about that i was still gonna buy it) After the dealer got my mechanics report he gave boat back to owner and now owner has it for sale with a different dealer. Only posted this cause i dont want a fellow fishwreckeder to get caught out with this one thats all.
VIC DORY
Posts: 308
Date Joined: 28/05/15
It is an offence to sell a
It is an offence to sell a vehicle (including a boat) that is unroadworthy/unsafe.
you would of course have to prove that the seller knows this, this is why the dealer refused to sell it after you brought it to their attention.
Pescatore70
Posts: 183
Date Joined: 03/12/19
Top bloke for letting us
Top bloke for letting us know.
Cheers
VIC DORY
Posts: 308
Date Joined: 28/05/15
New dealer selling it has no
New dealer selling it has no knowledge of any issues. Might pay to give them the report.
sea-kem
Posts: 15005
Date Joined: 30/11/09
Hey Beero can you tell us
Hey Beero can you tell us what some of the structural issues are?
Love the West!
beeroclock
Posts: 741
Date Joined: 22/08/12
The first red flag appeared to inspector when he tested
anchor winch. When anchor locked into position front deck lifted and the split bow rails bowed in towards each other!!! very weak structurally
So he started looking extra close and found welds that he could see cracked corroded and all had been covered up with sikaflex (classic giveaway) Electrolysis evident in kill tank floor, chimes had some holes and corrosion visible in the welded joins visible from outside. When he trimmed the motor down he couldnt understand why the leg didnt tuck in under the transom slightly like it is supposed to - then he realised a transom angle handnt been built into the pod holding the motor so motor going along in trimmed up position (said he had never seen that in 20 years of inspecting boats). Lots of cracked welding in other areas of boat. The wiring is a mess (i didnt care i was gonna redo it anyway), motor checked out good. Basically he said he would not go out in that boat based on what he could see and suspects if you lifted the floor it would be real bad in there. Also thinks it may have been built from a kit by somebody who's not a professional boat builder. All up cost me $460 to check everything but i saved a whole lot of shit down the track
sea-kem
Posts: 15005
Date Joined: 30/11/09
Wow! Yep plenty of wannabe
Wow! Yep plenty of wannabe boat builders out there with no welding experience. I do ali work as a non major part of my workshop and it's taken me a long time to master it, not the easiest material to work with. It contaminates very easily, basically need very clean conditions to work with it. It had major distortion issues as well. I would never buy a kit boat unless it was put together by someone qualified.
Love the West!
SeperateKnob
Posts: 668
Date Joined: 28/11/16
What length Jackman?
What length Jackman?
Darren253
Posts: 570
Date Joined: 23/07/16
Maybe they are on here... I
Maybe they are on here... I couldn't find it anymore.
VIC DORY
Posts: 308
Date Joined: 28/05/15
I sent this post to the new
I sent this post to the new dealer that was advertising the boat, probably explains why the advert has been taken down immediately.
NORUN NOFUN
Posts: 1035
Date Joined: 15/08/11
Just saw a Jackman on Boats
Just saw a Jackman on Boats on line, Is it the one at power and sail marine, South Perth ?
What a bloody shocker, that boat needs to be taken off the market, or advertised correctly and priced accordingly.
https://www.boatsonline.com.au/boats-for-sale/used/trailer-boats/jackman-7-3-custom-hardtop-jackman-design-ripper-plate-boat/249242
Faulkner Family
Posts: 18036
Date Joined: 11/03/08
No longer listed
No longer listed
RUSS and SANDY. A family that fishes together stays together
beeroclock
Posts: 741
Date Joined: 22/08/12
yep
yes that one
West Coast
Posts: 331
Date Joined: 10/12/07
Price?
Can you remember what the asking price was?
https://www.boatsonline.com.au/boats-for-sale/used/trailer-boats/jackman-7-3-custom-hardtop-jackman-design-ripper-plate-boat/249242
VIC DORY
Posts: 308
Date Joined: 28/05/15
I think it was around the
I think it was around the 70k mark
SeperateKnob
Posts: 668
Date Joined: 28/11/16
Interesting style bow rail
Interesting style bow rail
pelagicyachts
Posts: 1322
Date Joined: 23/02/11
you are being too kind! :-)
you are being too kind! :-) looks like a mistake!
sea-kem
Posts: 15005
Date Joined: 30/11/09
Lol looks like it was stolen
Lol looks like it was stolen from a local park.
Love the West!
pelagicyachts
Posts: 1322
Date Joined: 23/02/11
haha - during lockdown
haha - during lockdown maybe?? :-)
SeperateKnob
Posts: 668
Date Joined: 28/11/16
In lockdown as in prison? Lol
In lockdown as in prison? Lol and 70k must have brand new twin 250s
SeperateKnob
Posts: 668
Date Joined: 28/11/16
The winch post looks a bit
The winch post looks a bit odd too....
meglodon
Posts: 5981
Date Joined: 17/06/10
Thank you for the "heads up"
Good karma to you for your consideration of other boaties.
rob90
Posts: 1528
Date Joined: 06/02/13
been for sale for a few
been for sale for a few years now through 2 or 3 different owners. I had a look at it a while ago and just laughed at the dealer that was trying to sell it. His exact words were as i stepped off a surtees to jump onto this one. I wouldn't bother climbing onto that one if i were you and when i did i couldn't believe what i saw. Looks like its been welded by a blind butcher under water then the sikaflex bead to cover them is even worse, looks like in a stiff chop it would simply fall apart, if it looks that bad from above im scared to see whats below. Only worth motor value imo. Not the 70k plus asking price.
Hi my name is rob............. and I'm a........... fishaholic
timboon
Posts: 2957
Date Joined: 14/11/10
Hopefully the owner now
Hopefully the owner now hasn't already been burnt and is trying to get some coin back?
Would be interesting to know the history of the boat...
silly
Posts: 382
Date Joined: 02/01/09
https://www.gumtree.com.au/s-
https://www.gumtree.com.au/s-ad/kalamunda/motorboats-powerboats/7-3m-ally-hardtop-boat/1239833877?utm_campaign=socialbuttons&utm_content=ios_VIP&utm_medium=social&utm_source=com.apple.uikit.activity.copytopasteboard
Now for sale on gumtree.. 65k
Faulkner Family
Posts: 18036
Date Joined: 11/03/08
Now it's saying custom hull
Now it's saying custom hull not branded.
RUSS and SANDY. A family that fishes together stays together
SeperateKnob
Posts: 668
Date Joined: 28/11/16
Wow he even states “early
Wow he even states “early signs of electrolysis” least he seems honest. I like the motor but undecided on the wood grain steering wheel