furuno 295 help
Submitted by dan1 on Mon, 2014-03-24 11:08
I would like help from the furuno 295 guru's i ahve a 295 witha 200khz 2kw transducer and i would like some info on the general rule for setting the tvg
mostly fishing between 30-100 m aand occasionally going deeper at factory the tvg is set to 200m and i think setting 4
can somebody help me understand how to set this setting
scottnofish
Posts: 1621
Date Joined: 28/08/07
Always set your tvg to the depth your fishing
That way you will get the same return signal colours at the bottom / depth your fishing as you would only fishing in 10 m also set your tx power to 10 so it's always on max
dan1
Posts: 379
Date Joined: 11/07/07
colour
cheers scottnofish
what gets me is when i turn it down to say 30 m and back my gain off it still fills the screen with lots of clutter and i have the clutter at 30%
does this seem right?
scottnofish
Posts: 1621
Date Joined: 28/08/07
No doesn't seem right
I only run my clutter at 10 percent and can turn my gain to about 7 before I get any clutter on the screen