Tying off braid when snagged
Does anyone have an ingenious way of tying off braid when snagged up bottom bouncing. I'd rather not lock up the drag on the reel and hold on tight. Whilst I have done this before it is probably not particularly good for the reel. I've tried gloves but can never seem to find them handy when I need them. Of recent time I've been crisscrossing the braid in a figure 8s on a boat cleat and letting the boat do all the work but that's not always as easy as it sounds if you don't get enough wraps on the cleat quickly enough. A short piece of dowel, 200-250mm long, broom handle size and doing the crisscross method with that may be the way to go but I thought I would ask on here if anyone has a simpler solution. I don't want to reduce the breaking strain of my leader / trace material which is normally around the 80lb mark. Most times I find that either that breaks at a knot or the hooks straighten and I'm fine with that. It's finding a way of safely and quickly locking up the braid in a hand held device that I'm after.
bsir
Posts: 574
Date Joined: 24/04/11
Thumb
If needed, I normally just point the rod where the line is, then lock my thumb up on the spool (Im using an overhead).
bsir
Posts: 574
Date Joined: 24/04/11
Thumb
If needed, I normally just point the rod where the line is, then lock my thumb up on the spool (Im using an overhead).
Happy dayz
Posts: 450
Date Joined: 29/04/18
I put it in free spool for a
I put it in free spool for a few seconds then jig the hell out of it a couple of times and usally frees it's self , try that i pretty much always unsnag it that way
Happy dayz
paul d
Posts: 255
Date Joined: 16/03/13
+1 for Happy dayz
+1 for Happy dayz technique.
Travis p
Posts: 727
Date Joined: 28/07/16
Just wrap it
A few times around somthing and then hold the braid near your spool drive the boat forward until it pings
wont catch em sitting at home!
Gunner966
Posts: 145
Date Joined: 23/04/13
I wrap it 6 or 7 times
I wrap it 6 or 7 times around a 40 mm piece of wooden shovel handle I have in my boat .
little johnny
Posts: 5360
Date Joined: 04/12/11
Very simular to gunner
But I use my stainless gaff handle. I found braid cut into wood up top and brakes up top.4 to 5 raps 2 hands and let boat do work
Jackfrost80
Posts: 8147
Date Joined: 07/05/12
Driving the boat in the
Driving the boat in the opposite direction with the rod in the holder more often than not pulls it off for me otherwise I hold the spool and point the rod toward the snag to snap it. Maybe one of those knot tensioner tools to carry in your pocket?
Officially off the Pies bandwagon
little johnny
Posts: 5360
Date Joined: 04/12/11
Exactly what
I try first. Your 100 percent right , most off the time it comes off
sunshine
Posts: 2614
Date Joined: 03/03/09
I find many times that it is the sinker that snags
I now use much lighter leader for the sinker dropper, sure I loose some leads but it is very unusual for me to loose the whole trace and we make our own leads so I shrug off the occasional loss......tempted bloody providence now haven't I
Jackfrost80
Posts: 8147
Date Joined: 07/05/12
I was just thinking on Sunday
I was just thinking on Sunday if this would work after losing 4 rigs. WIll give it a crack
Officially off the Pies bandwagon
Feral
Posts: 1508
Date Joined: 01/11/06
I've made a few "industrial"
I've made a few "industrial" line pullers.. Heavy duty heat shrink over thick walled Ali tube or wooden broom handle . They are great for tying knots and the plastic grips the line very well
brown364
Posts: 249
Date Joined: 25/08/15
too true
Sunshine! the west will be offset by your you lead disposal now!
Auslobster
Posts: 1901
Date Joined: 03/05/08
The technology is there...
...at least two overhead jiggers (Ocea jigger and Saltiga 15) have a "locked spool" function...where the push of a button simply locks the spool for when a bust-off/hook straightening is required. Not a very complicated mechanism, I'm surprised other overheads haven't yet got it.
Alan James
Posts: 2226
Date Joined: 30/06/09
Thanks for the feedback guys
I like Feral's approach with some heat shrink over ali tube or thick dowel. I have some bike tube which should do the trick. I also found there is a product on the market for this exact purpose, see link below.
https://www.balista.com.au/lures/break-braid-tool
Happy Hooker
Posts: 305
Date Joined: 12/11/08
I wrap mine around the rear bollard a few times
when drifting , the drift generally pulls me off / breaks me off . Or do same and drive the boat in other direction . Takes pressure off rods and reel . Just need to do it enough so doesn't slip .
Mrlickalotopus
Posts: 109
Date Joined: 27/07/16
I allways use 40Lb mono
I allways use 40Lb mono leader for the sinker. If snagged we usualy put a few loops around the hand rail and wait till somthing gives, in most cases we do retrieve all the gear.
Helen
Posts: 597
Date Joined: 06/02/10
Nice name. lol. Do you mean
Nice name. lol.
Do you mean you would use 80lb mono for the rest of the rig but just the sinker extension you change to 40lb? :)
https://www.facebook.com/media/set/?set=a.408848386241.187244.576756241&type=1&l=8a3bfed72d
little johnny
Posts: 5360
Date Joined: 04/12/11
all brilliant ideas
Another good one if fishing snaggy ground , use a length of stainless chain ( cheap from salvage yards, recycle mobs). Or galvenized. It snakes over the ground , rather than getting stuck. ( use scales to weigh different lengths) doesn't put fish off at all. Ask any diver when they swim down what hangs around anchor if there in area of coarse.I always use 130 ld main dropper/100 lb for weight. Also always use circles on bottom rig.i still loose rigs like everyone else . Sometimes your stuck.
hezzy
Posts: 1521
Date Joined: 27/11/09
as above i tend to us ea
as above
i tend to us ea lighter line for the lead dropper , and if it cant be teased off in a few jerks by slacking the line then lifting it quickly , i put it into free spool and go back up on my track to pull if off in direction we have drifted down ,,,
the last one is more time consuming and a pain if it keeps happening , so the deckies usualy get schooled up quickly to pay attention to their line out and sounder pics as you drift over lumps and rises etc, that way they can ''see '' whats coming , before they hook up on it and anticipate to lift their line up abit etc then drop back down as you descend the drop off
hezzy
OFW 11
evil flourishes when good men do nothing
Faulkner Family
Posts: 18049
Date Joined: 11/03/08
i tend to just hold the
i tend to just hold the spool and point the rod towards the line, i use rig line 20lb lighter than the shock leader so if its going to break its below the swivel. 50lb braid 80lb shock leader and 60lb rig line
RUSS and SANDY. A family that fishes together stays together
Doc
Posts: 691
Date Joined: 29/05/16
We use the boat also, tie
We use the boat also, tie off the line to the bollard and idle off.
Ktreloar
Posts: 115
Date Joined: 05/08/16
How goo is it when a 50
How goo is it when a 50 dollar jig snags up
Jackfrost80
Posts: 8147
Date Joined: 07/05/12
Officially off the Pies bandwagon
Alan James
Posts: 2226
Date Joined: 30/06/09
...
I've considered downsizing the strength of the assist cords to alleviate that problem. Those octo jigs and pirate jigs seem to hang up on the bottom very easily as well to the extent that I am now very weary of where I use them. Lighter homemade assists may again be the solution.