somethings not quite right
Submitted by wez0062 on Wed, 2016-07-06 13:58
somehow, I don't think these will buff out
____________________________________________________________________________
Wez0062
Image Upload:
Sambo84
Posts: 116
Date Joined: 23/08/14
looks brand new
looks brand new
Krusty
Posts: 714
Date Joined: 27/11/15
Whoever did that probably
Whoever did that probably finished whatever he did inside the boat......stood back and took a sip of his beer and thought to himself.....I can do really great stuff when I put my mind to it, that looks awesome.
Then hopped out of the boat.......
Oh F#*K I'm a fair dinkum dickhead
My fishing spots are so secret........... even the fish don't know where they are !!
dodgy
Posts: 4588
Date Joined: 01/02/10
I've heard of guys screwing
I've heard of guys screwing straight through into bunk trailers and wondering why they won't float off.
Does anyone know where the love of god goes, when the waves turn the minutes to hours?
Deckie
Posts: 1296
Date Joined: 03/04/09
somethings not quite right.
Yep, it's a boat, should have used stainless steel screws.
Galv ones won't last very long in salt water.......
Cheers & Stay safe
markj
Posts: 163
Date Joined: 23/12/08
Oops!
When you're having a bad day - there's always someone out there having a worse one!
dano83
Posts: 790
Date Joined: 25/05/12
Must of been a ceiling fixer
Must of been a ceiling fixer looks like drywall screws, there like zip ties and gaffs tape fixes everything
meglodon
Posts: 5981
Date Joined: 17/06/10
I can't believe what I'm seeing
This is a bit of trick photography right, I've read about people being able to alter photos. It just can't be true.
fishcrazy
Posts: 1235
Date Joined: 27/01/07
screws
First glass boat i bought had exactly the same guy used stainless screws but the guy used 2 inch screws right around the pedestal base fine on the inside but near the gunnel they just stuck through the hull lol
fishcrazy
Posts: 1235
Date Joined: 27/01/07
screws
First glass boat i bought had exactly the same guy used stainless screws but the guy used 2 inch screws right around the pedestal base fine on the inside but near the gunnel they just stuck through the hull lol
squidvicious1
Posts: 857
Date Joined: 22/07/10
At least whatever he screwed
At least whatever he screwed down won't fall off.
Krusty
Posts: 714
Date Joined: 27/11/15
Apparently it was an Air Bed
Apparently it was an Air Bed he got sick of moving around on deck so decided to secure it down
My fishing spots are so secret........... even the fish don't know where they are !!
uncle
Posts: 9660
Date Joined: 10/02/07
Unbelievable
Bugger
all aggressive fish love bigjohnsjigs
chris raff
Posts: 3257
Date Joined: 09/02/10
Mr McGoo could’ve worked out
Mr McGoo could’ve worked out the screws might’ve been a smidge too long .. Billy Blunt
“Intelligence is like a four-wheel drive. It only allows you to get stuck in more remote places.”
Swompa
Posts: 4044
Date Joined: 14/10/12
http://www.sail-world.com/US
http://www.sail-world.com/USA/Volvo-Ocean-Race--Abu-Dhabis-Southern-Ocean-repair--Video/95455
Similar but intentional.
nightfish
Posts: 327
Date Joined: 18/10/10
Speed holes
goes faster!
scottnofish
Posts: 1621
Date Joined: 28/08/07
Seen the same thing happen
On a crab boat I was wiring up at Freeman Bay boats years ago .the engineer was installing all the fuel lines for the main engine and screwed all his pipe clamps directly to the keel with 2 inch screws for nearly 15m looked great until you looked outside and there was about 200 screws sticking out the hull .needless to say he wasn't allowed back on that boat