Removing scratches from sounder screen
Submitted by Dirt on Sat, 2014-01-25 19:12
Hey guys, I've some how ended up with Lots of very faint scratches on my furuno 585. You can't even fell them with your hand, long shot I know but is there any way these can be buffed out any way

Michael Yoni
Posts: 609
Date Joined: 02/01/11
Not that I have tried but
Not that I have tried but what about what they use for CD's ??
scotto
Posts: 2474
Date Joined: 21/04/08
STOP!
Furunos have an anti-glare film on their screens, that's why you can view them in direct sunlight. What you have is scratches on the film, but unfortunately these can't be removed. All that is happening is you are removing the anti glare. If you try and buff, wipe, clean, polish these out, all you will do is further scratch the film and make it worse.
You'll have to live with how the screen is now, and long term, just give the screen a splash of fresh water (units are splash proof), and a LIGHT wipe with a microfibre cloth.
Dirt
Posts: 463
Date Joined: 04/03/10
Cheers Scotty
Samo76
Posts: 63
Date Joined: 17/08/08
Not sure about that scotto,
Not sure about that scotto, i used a fine car polish on cloth for mine and it come out like brand new, although mine is a furuno 7000f, give it a go on just a little section in the corner first Dirt, i was sceptical at first but it works a treat!
Here I am...and there you are.
Dirt
Posts: 463
Date Joined: 04/03/10
Interesting
Samo, do you have some specifics on the polish used mate.
Simon C
Posts: 801
Date Joined: 01/05/07
Windex
Works fine on mine with a microfiber cloth - didn't know about the anti glare film so maybe I just polished that off
scotto
Posts: 2474
Date Joined: 21/04/08
Sorry
This is for the fcv 620/585/627/587's. Not sure about the bigger models.
In the end, your sounder will still be readable, but I did it to my 620 thinking I was removing the scratches the harder I buffed. It wasn't until I was nearly finished that I realised the screen suddenly looks shinier, then I clicked
Wazza79
Posts: 315
Date Joined: 23/05/11
Thought ahead with this one.
Had similar mentioned to me prior to getting my new sounder. Went out and got an iPad protective screen, trimmed it up an stuck that onto my sounder screen. No worries of scratches now!
Dirt
Posts: 463
Date Joined: 04/03/10
Stuck with it
Looks like I'm stuck with them buy the sounds of it, Bummer I'm a bit pedantic with all my fishing and boating gear and they bug the shit out of me every time I look at it. Anyway thanks everyone for your feedback
JohnF
Posts: 2841
Date Joined: 07/07/10
Dirt, no worries mate, you
Dirt, no worries mate, you can easily remove the antiglare finish on the FCV585 which is what you have scratched.
I scratched mine first week I had it with salt water that dried on the screen......the Verado club website recommended windex with a microfibre coth to get the anti glare coating off the vesselview screen, so I tried this on my FCV587 as the screen was scratched badly and has a similar antiglare coating......my screen now looks perfect and better than with the poxy antiglare.
i take no responsibility for any cockups though, but it worked perfectly for me. Google "remove anti glare coating vesselview".
Good luck
Contender 25T - good hezza boat
Tim
Posts: 2497
Date Joined: 26/09/06
Furuno
Dean I did mine with a fine car polish (non cut) years ago. Still works fine only thing is it has changed how its viewed thru polaroids/ from n angle slightly.
The scratches were giving me the shits too so have no regrets.
You can try my screen if you like to see if you could live with it or not.
Dirt
Posts: 463
Date Joined: 04/03/10
Thanks
Thanks Tim and John , I will definitely try it after I've googled it