furuno 585
Submitted by schmik on Sat, 2011-12-31 16:53
hi guys just fitted a furuno 585 sounder with a 600watt transducer to our 660 trailcraft and wondering how yous set up the display ,a guy gave us some settings but i dont think there right,as i want the fish arches not the fish symbols any help would be great cheers daniel
grayzeee
Posts: 2283
Date Joined: 09/07/09
have a good read through the
have a good read through the manual , you'll def need too.
other than that , generally use high freq out to 150 meters with bottom lock and a scope on
If I spent half as long fishing , as I do reading this bloody forum , I'd be twice the fisherman I am.
r.gates
Posts: 573
Date Joined: 15/11/10
Online manual
Hi schmik
You'll find the online manual for your sounder here: http://www.furunousa.com/ProductDocuments/FCV585%20FCV620%20Operator's%20Manual%20G%20%201-7-11.pdf
Section 1.15 on page 11 shows you how to switch fish symbols on and off.
I've got the FCV-620 in my Trailblazer...hope this helps.
regards
rusty...
If life is boring, you must be doing it wrong!
Alan James
Posts: 2243
Date Joined: 30/06/09
Furuno Settings
You will find some good info here:
http://fishwrecked.com/forum/tuning-furuno-fcv-620